lab-10-fpga-security-gate

In this lab we will use the BASYS 3 board and an Arduino to implement the logic for a security gate. The gate has a panel will use 5 switches. The switches sw4,sw3,sw2,sw1,sw0 need to be set to a secret pattern of sw4=1,sw3=0,sw2=0,sw1=1,sw0=1 to open the gate.

The project has been split into 2 components. The Arduino takes in an UNLOCK signal and opens the gate when UNLOCK=1 and closes the gate when UNLOCK=0. The gate is controlled by a servo. A program for the Arduino that controls the gate/servo has been uploaded to Canvas.